EN
Features
-Configuration: SPST means each switch within the DIP package can connect one input to one output.
-Package Type: Standard DIP switches are usually housed in a rectangular plastic package with a row of pins on either side for through-hole mounting on a PCB (Printed Circuit Board).
-Right Angle Recessed Type: This refers to the orientation and design of the switch. "Right angle" means the pins are mounted perpendicular to the body of the switch, suitable for through-hole PCB mounting. "Recessed" indicates that the switch body may be slightly inset or protected by the housing, which can help prevent accidental actuation.
-Number of Pins: DIP switches typically range from 1 to 12 pins. Each pin corresponds to a separate switch contact.
Applications
1.Electronic Devices Configuration
2.PCB Prototyping and Development
3.Embedded Systems
4.Consumer Electronics
Specifications
SPST Standard Right angle Recessed Type dip switch 1~12pins
Material:
Cover: PBT plastic (red or blue)
Base: PBT plastic (black)
Operator: POM plastic (white)
Stock: epoxy resin potting
Terminal: tin plated phosphor bronze, contact gold plated 3u"
Sealing tape: polyimide KAPTON
Switching Characteristics:
Switch Capacity: 25mA at 24VDC
Insulation Resistance:100MΩ at 250VDC
Contact Resistance: 50mΩ max.
Insulation strength: 500VAC / 1min
Operation Force : 1000gf max.
Electrical life: 2000 times
Operation Temp:-20ºC~+70ºC
Welding requirements:
Manual welding: 320 degrees C no more than 2 seconds. (30 watt iron max.)
Wave soldering: 260 degrees C no more than 5 seconds, in the welding and cleaning process switch is open state.
Technical Documents
Please contact us for more information.
SPST Standard Right angle Recessed Type dip switch 1~12pins:RHTGYAR