PRODUCTS FINDER

+
Antennas
- -
  GPS/Glonass/Compass Antenna
  -
  GSM/CDMA/3G/LTE Antenna
  -
  WIFI/WLAN Antenna
  -
  4G Antenna
  -
  433/868/915MHz Antenna
  -
  GPS-GLONASS Antenna
  -
  Dielectric Antenna
  -
  RF Cable Assemblies
+
Buzzers
- -
  Piezo Buzzers
  -
  Piezo Transducer Buzzers
  -
  Magnetic Transducer Buzzers
  -
  Mechanical Buzzers
  -
  SMD Magnetic Buzzers
  -
  SMD Piezo Buzzers
  -
  Mini Microphone
  -
  Speaker
+
Connectors
- -
  Wire to board connectors & Wire to wire connectors
  -
  Male pin header connetors & Mini jumper connectors
  -
  Female header connectors
  -
  Box header connectors & Ejector header connectors
  -
  Micro match connectors
  -
  IDC connectors
  -
  FFC/FPC connectors
  -
  IC socket & PLCC socket & ZIF socket connectors
  -
  D-Sub connectors & D-SUB hood
  -
  SIM card connectors & Micro SIM card connectors & Nano SIM Card Connectors
  -
  Memory card connectors
  -
  EDGE card connectors & CF card connectors
  -
  Smart card connectors
  -
  USB 3.1 type C connectors
  -
  USB 3.0 connectors
  -
  USB 2.0 connectors
  -
  IEEE 1394 connectors
  -
  AC power socket connectors*AC power plug connectors
  -
  Mini USB connectors
  -
  Micro USB connectors
  -
  SATA connectors
  -
  DVI connectors & HDMI connectors
  -
  DIN41612 connectors
+
Encoder And Potentiometers
- -
  Cermet Potentiometers
  -
  Trimmer Potentiometers
  -
  Wire-Wound Potentiometers
  -
  Rotary Potentiometers
+
Battery Holders
- -
  18650 Battery Holder
  -
  Coin Cell Holders
  -
  AA & UM-3 Battery Holder
  -
  AAA&UM-4 Battery Holders
  -
  Battery Connectors
+
Fuses And Fuse Holders
- -
  3.6*10mm Fuses
  -
  4*15mm Fuses
  -
  5.2*20mm Fuses
  -
  6.3*25mm /6.3*30mm / 6.3*32mm Fuses
  -
  Fuse Clips
  -
  Panel Type Fuse Holders
  -
  PCB Type Fuse Holders
  -
  Fuse Hloder With Cable
  -
  PTC Resettable Fuses
  -
  Thermal fuses
  -
  Auto Fuses And Auto Fuse Holders
  -
  SMD PTC Resettable Fuses
  -
  Overload Switches
  -
  TVS Diode
  -
  SMD Fuses
+
Flat Cables And Cable Assemblies
- -
  FFC/FPC cables
  -
  Flat cables
  -
  Rainbow ribbon cables
  -
  IDC cable assemblies
  -
  USB cables
  -
  Power cords
  -
  Wire harness
  -
  LAN cables* Fibre-optic Patch Cables
  -
  Phone cords
  -
  SATA cables
  -
  D-SUB cables * VGA cables
  -
  Audio/Video adaptor cables
  -
  SCSI cables
  -
  XLR audio cables
  -
  RCA audio cables
  -
  Mono/Stereo audio cables
  -
  HDMI cables * DVI cables
  -
  DC cables
  -
  S-Video cables
+
Fans
- -
  DC fans
  -
  AC fans
  -
  DC blowers
  -
  LED fans
  -
  DC cross flow fan
  -
  Fan accessories
+
Power Accessories
- -
  Power Relay
  -
  Current Transformers
  -
  SMD chip inductors
  -
  Latching Relays
  -
  Axial conformal coated inductors
  -
  Power chokes inductors
  -
  SMD inductors
  -
  High current filter chokes inductors
  -
  Toroidal common mode chokes
  -
  High frequency transformers
  -
  Nanocrystalline magnetic cores
  -
  Adjustable inductors
  -
  Common mode chokes
  -
  Beads
  -
  SMD molded wound chip inductor
  -
  Industrial Relay
  -
  High Power Metering Relay
  -
  Automotive Relay
  -
  Signal Relay
  -
  HVDC Relay
  -
  High-Frequency Relay
  -
  Relay Socket
+
Quartz Crystal Units And Ceramic Resonators
- -
  32.768KHz Crystal Units
  -
  Crystal resonators
  -
  Quartz crystal filter
  -
  Ceramic resonators
  -
  Ceramic filter
  -
  Ceramic discriminators
+
Switches
- -
  Rocker switches
  -
  Tactile switches
  -
  Slide switches
  -
  Push button switches
  -
  Toggle switches
  -
  Push switches
  -
  DIP switches
  -
  Rotary switches*Coding switches
  -
  Switch caps
  -
  LED push button switches
  -
  Micro switches
  -
  Multi-Function switches
+
Audio Connectors
- -
  2.5mm phone jack audio connectors
  -
  2.5mm3.5mm6.3mm phone plug audio connectors
  -
  3.5mm phone jack audio connectors
  -
  6.3mm phone jack audio connectors
  -
  Audio*Video adaptor connectors
  -
  Banana plug connectorsBanana jack connectors
  -
  Binding post connectors
  -
  DC power PLUG
  -
  DIP DC power connectors
  -
  LARGE CURRENT DC JACK
  -
  Loudspeaker connectors
  -
  Mini din connectors*Din connectors
  -
  Power Din Jack & Plug
  -
  RCA jack connectors
  -
  RCA plug connectors
  -
  Security Camera DC Power Connectors & Adapters
  -
  SMT DC power connectors
  -
  XLR connectors
+
RF Connectors
- -
  SMA Connectors
  -
  SMB Connectors
  -
  MCX Connectors
  -
  MMCX Connectors
  -
  U.FL*UMCC*I-PEX connectors
  -
  Fakra connectors
  -
  F connectors
  -
  BNC connectors
  -
  TNC connectors
  -
  N Connectors
  -
  1.0/2.3 Connectors
  -
  1.6/5.6 Connectors
  -
  7/16 (L29) DIN connectors
  -
  Mini UHF connectors
  -
  UHF connectors
  -
  FME connectors
+
Ethernet Connectors
- -
  Modular Jacks
  -
  SMT Modular Jacks
  -
  LSA-PLUS Modules
  -
  ADSL Modular Adapter *Telephone Jack Adapter
  -
  CAT3 Keystone Jacks
  -
  IDC Wire Connectors
  -
  CAT5E/CAT6/CAT6A Keystone Jacks
  -
  Ethernet Magnetic Transformers
  -
  SFP/XFP/QSFP Connectors
  -
  Modular Plugs
  -
  Modular Jack With Transformer
  -
  Krone IDC Block PCB-PLUS
+
Terminal Blocks
- -
  Reflow Solder LCP Housing Terminal Blocks
  -
  PCB Terminal Block Rising clamp
  -
  Non-Insulated Terminals
  -
  Insulated Terminals
  -
  Miniature Rail-Mounted Terminal Blocks
  -
  Feed Through Terminal Blocks And Box
  -
  Barrier Terminal Blocks
  -
  Screwless-Spring Terminal Blocks
  -
  Pluggable Terminal Blocks
  -
  PCB Terminal Block Wire Protector
  -
  Solder Terminals For PCB Mount
+
Circular Connectors
- -
  W13&W17&W21 IP68 waterproof circular connectors
  -
  RJ45 waterproof circular connectors
  -
  USB waterproof circular connectors
  -
  IP65 waterproof loudspeaker connectors
  -
  RD24 IP67 waterproof circular connectors
  -
  D-SUB waterproof connectors
  -
  M20 Waterproof Connectors
  -
  Circular Connectors
  -
  M12 IP67 Waterproof Connectors
  -
  Quick Lock B Series IP67 Waterproof Connectors
  -
  C091 & 581 series Miniature Circular Connectors
  -
  EV charging connectors
+
Tools
- -
  US POWER STRIP
  -
  AUTO CIG PLUG
  -
  Heat shrinkable tubing
  -
  PVC insulation tape
  -
  Solderless breadboard
  -
  Solderless Jumper Wires
  -
  Solder Tools
  -
  HEAT GUN
  -
  CRIMP TOOLS
+
LED Lighting Connectors
- -
  Waterproof junction box
  -
  Fuse terminal blocks
+
Optoelectronics
- -
  Single LED numeric display
  -
  Led spacer support
+
Wiring Accessories

USB 2.0 connectors

USB 2.0 Connectors are engineered for dependable data communication and power connectivity across a wide range of electronic devices. Their design focuses on contact resistance, terminal alignment, insertion durability, electrical clearance and housing strength. Optimized structural details help maintain consistent connections during repeated use, while compact configurations support flexible PCB integration in computers, peripherals, control equipment and consumer electronics.

Enlarge

Quick View

A Female SMD USB Connector :RHTAY813

Series Part No:RHTAY813

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Features

-Shielding: Often includes shielding to protect against electromagnetic interference (EMI), which helps maintain signal integrity during data transmission.

-Connector Type: Female USB connectors are designed to receive male USB plugs, enabling devices to connect for data transfer, charging, and other functionalities.

-Mounting Type: Surface mount device (SMD) connectors provide secure attachment to the PCB during soldering, ensuring mechanical stability and reliable electrical connections.

-Compatibility: Compatible with a wide range of electronic devices and applications that require USB connectivity, such as smartphones, tablets, laptops, consumer electronics, and industrial equipment.

Applications

1.Mobile Devices

2.Laptops and Ultrabooks

3.Consumer Electronics

4.Networking Equipment

Specifications

Material

Housing:Hing Temperature Thermoplastic,

UL94V-0 LCP,Black/White.

Contact:Copper Alloy C2680.

Shell:Copper Alloy C2680/SPCC.

Finish:

Contact:Plated Gold In Mating Area;Tin On Solder Tails.

Shell:Nickel Plating.

Electrical:

Current Rating:1.5A/Contact Terminal.

Voltage Rating:30V DC

Contact Resistance:30mΩ Max.

Dielectric Withstanding Voltage:500 V AC AT Sea Level.

Insulation Resistance:1000MΩ Min.

Connector Mate and Unmated Force

Mate Force:3.75kgf Max.

Unmated Force:1.02kgf Min.

Terminal Retenion:1.2kgf Min.

Technical Documents

Please contact us for more information.

X

X
Enlarge

Quick View

upright dip 90 A Female USB Connectors:RHTAY91

Series Part No:RHTAY91

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Features

-Form Factor: The connector is designed to fit into USB Type A male ports commonly found on computers, hubs, and various USB devices.

-Orientation: The 90-degree upright dip configuration means that the connector is mounted vertically on the circuit board, allowing for more compact designs and efficient use of space.

-Pin Configuration: It adheres to the standard USB pinout, with four pins typically used for data transfer and power (VCC, Data+, Data-, GND).

-Compatibility: It is compatible with USB 1.1, USB 2.0, and USB 3.0 standards, depending on the specific connector specifications and design.

Applications

1.Consumer Electronics

2.Medical Devices

3.Automotive Electronics

4.Telecommunications

Specifications

Material

Housing:Hing Temperature Thermoplastic,UL94V-0 PBT,Black/White.

Contact:Copper Alloy C2680.

Shell:Copper Alloy C2680/SPCC.

Finish:

Contact:Plated Gold In Mating Area;Tin On Solder Tails.

Shell:Nickel Plating.

Electrical:

Current Rating:1.5A/Contact Terminal.

Voltage Rating:30V DC

Contact Resistance:30mΩ Max.

Dielectric Withstanding Voltage:500 V AC AT Sea Level.

Insulation Resistance:1000MΩ Min.

Connector Mate and Unmated Force

Mate Force:3.75kgf Max.

Unmated Force:1.02kgf Min.

Terminal Retenion:1.2kgf Min.

Technical Documents

Please contact us for more information.

X

X
Enlarge

Quick View

Molex 0482040001 USB - A USB 2.0 Receptacle Connector 4 Position Through Hole, Right Angle:RHTAY91C

Series Part No:RHTAY91C

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Features

-USB-A Receptacle: This connector type is standard for USB-A ports, commonly found on computers, laptops, chargers, and various consumer electronics devices.

-USB 2.0 Standard: Supports USB 2.0 specifications, which include data transfer rates up to 480 Mbps (megabits per second). It is backward compatible with USB 1.1 devices but does not support the higher speeds of USB 3.x.

-Positions: Refers to the number of electrical contacts or pins in the connector. In this case, it likely includes VCC (power), Ground, and two data lines (D+ and D-) necessary for USB communication.

-Through Hole Mounting: Designed for through-hole PCB (Printed Circuit Board) mounting. Through-hole mounting involves inserting the component's leads through holes in the PCB and soldering them on the opposite side to secure the connector in place.

Applications

1.Automotive Applications

2.Consumer Electronics

3.Networking Equipment

4.Industrial Equipment

Specifications

Molex 0482040001 USB - A USB 2.0 Receptacle Connector 4 Position Through Hole, Right Angle

Technical Documents

Please contact us for more information.

X

X
Enlarge

Quick View

upright dip 90 A Female USB Connectors :RHTAY815

Series Part No:RHTAY815

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Features

-Form Factor: The connector is designed to fit into USB Type A male ports commonly found on computers, hubs, and various USB devices.

-Orientation: The 90-degree upright dip configuration means that the connector is mounted vertically on the circuit board, allowing for more compact designs and efficient use of space.

-Pin Configuration: It adheres to the standard USB pinout, with four pins typically used for data transfer and power (VCC, Data+, Data-, GND).

-Compatibility: It is compatible with USB 1.1, USB 2.0, and USB 3.0 standards, depending on the specific connector specifications and design.

Applications

1.Medical Devices

2.Automotive Electronics

3.Telecommunications

4.IoT Devices

Specifications

Material

Housing:Hing Temperature Thermoplastic,UL94V-0 PBT,Black/White.

Contact:Copper Alloy C2680.

Shell:Copper Alloy C2680/SPCC.

Finish:

Contact:Plated Gold In Mating Area;Tin On Solder Tails.

Shell:Nickel Plating.

Electrical:

Current Rating:1.5A/Contact Terminal.

Voltage Rating:30V DC

Contact Resistance:30mΩ Max.

Dielectric Withstanding Voltage:500 V AC AT Sea Level.

Insulation Resistance:1000MΩ Min.

Connector Mate and Unmated Force

Mate Force:3.75kgf Max.

Unmated Force:1.02kgf Min.

Terminal Retenion:1.2kgf Min.

Technical Documents

Please contact us for more information.

X

X
Enlarge

Quick View

Upright dip 90 A Female USB Connector: RHTAY824

Series Part No:RHTAY824

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Features

-USB Type A Female Interface: Complies with USB 2.0 standards, ensuring broad compatibility with a wide range of USB devices and peripherals requiring a Type A female port.
-Upright DIP 90-Degree Mounting: The upright dual inline package (DIP) design with a 90-degree right-angle orientation optimizes PCB layout by saving space and allowing convenient cable connection in vertical direction.
-Robust Mechanical Construction: Constructed with a nickel-plated metal shell that provides excellent durability, corrosion resistance, and electromagnetic interference (EMI) shielding to maintain signal integrity.
-High Mating Cycle Durability: Engineered to withstand frequent insertion and removal cycles, ensuring long-lasting and reliable connections in demanding commercial and industrial environments.

Applications

1.Industrial Automation
2.Medical Devices
3.Communication Equipment
4.Office Equipment

Specifications

Material
Housing:Hing Temperature Thermoplastic,UL94V-0 PBT,Black/White.
Contact:Copper Alloy C2680.
Shell:Copper Alloy C2680/SPCC.
Finish:
Contact:Plated Gold In Mating Area;Tin On Solder Tails.
Shell:Nickel Plating.
Electrical:
Current Rating:1.5A/Contact Terminal.
Voltage Rating:30V DC
Contact Resistance:30mΩ Max.
Dielectric Withstanding Voltage:500 V AC AT Sea Level.
Insulation Resistance:1000MΩ Min.
Connector Mate and Unmated Force
Mate Force:3.75kgf Max.
Unmated Force:1.02kgf Min.
Terminal Retenion:1.2kgf Min.

Technical Documents

Please contact us for more information.

X

X
Enlarge

Quick View

upright dip 90 A Female USB Connectors L10mm :RHTAY822

Series Part No:RHTAY822

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Features

-USB Type A Female Interface: Designed to meet USB 2.0 standards, ensuring wide compatibility with USB-enabled devices and peripherals requiring a Type A female port.
-Upright DIP 90-Degree Mounting: The dual inline package (DIP) with a 90-degree upright orientation enables efficient PCB layout, allowing vertical cable connection and saving board space.
-10mm Length Design: Provides an extended connector length of 10mm, suitable for applications requiring additional clearance or mechanical support.
-Durable Construction: Features a nickel-plated metal shell that offers excellent corrosion resistance, robust mechanical strength, and electromagnetic interference (EMI) shielding to maintain signal integrity.

Applications

1.Automotive Electronics
2.Networking Devices
3.Home Appliances
4.Point of Sale (POS) Systems

Specifications

Material
Housing:Hing Temperature Thermoplastic,UL94V-0 PBT,Black/White.
Contact:Copper Alloy C2680.
Shell:Copper Alloy C2680/SPCC.
Finish:
Contact:Plated Gold In Mating Area;Tin On Solder Tails.
Shell:Nickel Plating.
Electrical:
Current Rating:1.5A/Contact Terminal.
Voltage Rating:30V DC
Contact Resistance:30mΩ Max.
Dielectric Withstanding Voltage:500 V AC AT Sea Level.
Insulation Resistance:1000MΩ Min.
Connector Mate and Unmated Force
Mate Force:3.75kgf Max.
Unmated Force:1.02kgf Min.
Terminal Retenion:1.2kgf Min.

Technical Documents

Please contact us for more information.

X

X
Enlarge

Quick View

A Female Dip 90 USB Connector :RHTAY810

Series Part No:RHTAY810

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Features

-USB Type A Female Interface: Designed to comply with USB 2.0 standards, ensuring broad compatibility with a variety of USB-enabled devices and peripherals requiring a Type A female connection.
-DIP 90-Degree Mounting: The dual inline package (DIP) with a 90-degree right-angle orientation enables efficient PCB layout, optimizing space usage and facilitating easy cable management.
-Robust Mechanical Construction: Constructed with a nickel-plated metal shell that offers excellent durability, corrosion resistance, and electromagnetic interference (EMI) shielding to preserve signal integrity.
-Thermoplastic Insulator: Made from high-quality, flame-retardant thermoplastic materials that provide reliable electrical insulation and thermal stability under different operating conditions.

Applications

1.Robotics
2.Power Supply Units
3.Data Acquisition Systems
4.Instrumentation

Specifications

Material
Housing:Hing Temperature Thermoplastic,
UL94V-0 PBT,Black/White.
Contact:Copper Alloy C2680.
Shell:Copper Alloy C2680/SPCC.
Finish:
Contact:Plated Gold In Mating Area;
Tin On Solder Tails.
Shell:Nickel Plating.
Electrical:
Current Rating:1.5A/Contact Terminal.
Voltage Rating:30V DC
Contact Resistance:30mΩ Max.
Dielectric Withstanding Voltage:
500 V AC AT Sea Level.
Insulation Resistance:1000MΩ Min.
Connector Mate and Unmated Force
Mate Force:3.75kgf Max.
Unmated Force:1.02kgf Min.
Terminal Retenion:1.2kgf Min.

Technical Documents

Please contact us for more information.

X

X
Enlarge

Quick View

A Female Dip 90 USB Connector : RHTAY820

Series Part No:RHTAY820

RoHS Compliance:Yes

Download Datasheet:

Write Your Request Full P/N :

QTY:

Features

-High Mating Cycle Durability: Engineered to withstand thousands of mating cycles, ensuring consistent performance and long service life in demanding environments.
-Stable Data and Power Transmission: Provides reliable USB data communication and power delivery with minimal signal loss and interference.
-RoHS Compliant: Manufactured according to Restriction of Hazardous Substances (RoHS) directives, promoting environmental safety and regulatory compliance.
-Compact and Space-saving: The 90-degree DIP design reduces PCB footprint while maintaining strong mechanical stability and ease of assembly.

Applications

1.Power Supply Units
2.Data Acquisition Systems
3.Instrumentation
4.Security Systems

Specifications

Material
Housing:Hing Temperature Thermoplastic,
UL94V-0 PBT,Black/White.
Contact:Copper Alloy C2680.
Shell:Copper Alloy C2680/SPCC.
Finish:
Contact:Plated Gold In Mating Area;
Tin On Solder Tails.
Shell:Nickel Plating.
Electrical:
Current Rating:1.5A/Contact Terminal.
Voltage Rating:30V DC
Contact Resistance:30mΩ Max.
Dielectric Withstanding Voltage:
500 V AC AT Sea Level.
Insulation Resistance:1000MΩ Min.
Connector Mate and Unmated Force
Mate Force:3.75kgf Max.
Unmated Force:1.02kgf Min.
Terminal Retenion:1.2kgf Min.

Technical Documents

Please contact us for more information.

X

X

Previous page 1 2 3 4 5 6 next page